Sources
Where our numbers come from
Every calculator on this site runs on the figures below. 159 are sourced facts: read from a maker's data sheet, a retailer's product page or an official body, checked on the date shown, with a link to the document. 42 are editable defaults: rules of thumb such as waste allowances, labelled as defaults, which you can change in the calculator.
Found a figure that is out of date? Tell us and we will check it against the maker's current document.
Concrete slab calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| concrete bags per m3 20kg cement australia Concrete slab | 110 bags/m3 | Verified 2026-11-18 | Cement Australia Concrete Mix product data sheet (PDS CM rev 3): 110 x 20 kg bags are required per cubic metre. Open the document |
| concrete bags per m3 20kg boral Concrete slab | 108 bags/m3 | Verified 2026-11-18 | Boral Concrete Mix product data sheet: 108 x 20 kg bags equate to one cubic metre of mixed concrete. Open the document |
| concrete bag yield 25kg (New Zealand) Concrete slab | 0.01 m3 | Verified 2026-11-18 | Dricon (Firth) HandiCrete page: 25 kg bag yield 0.010 m3. Open the document |
| concrete bag yield 40kg (New Zealand) Concrete slab | 0.016 m3 | Verified 2026-11-18 | Dricon (Firth) HandiCrete page: 40 kg bag yield 0.016 m3. Open the document |
| concrete slab waste Concrete slab | 5 % | Verified 2026-11-18 | Cement Australia slab calculator page: calculation includes a 5% allowance for wastage and rounds bags up. Open the document |
| concrete slab thickness path Concrete slab | 100 mm | Editable default | common practice for paths and patios (Cement Australia how-to uses a 100 mm slab as its example), editable |
| concrete slab min thickness Concrete slab | 75 mm | Verified 2026-11-18 | Cement Australia slab calculator page: minimum thickness for a non-load bearing slab would be 75 mm (consult a professional for loads). Open the document |
| concrete readymix order step Concrete slab | 0.2 m3 | Editable default | typical ready-mix ordering granularity, rule of thumb, editable; confirm with local plant |
| concrete readymix consider m3 Concrete slab | 1 m3 | Editable default | Rule of thumb: above about 1 m3 a ready-mix delivery is usually easier than mixing bags. Editable; ask your supplier about minimum orders and short-load fees. |
| concrete base depth Concrete slab | 50 mm | Verified 2026-11-18 | Cement Australia how to lay a concrete slab: excavate an extra 5 cm and compact crusher dust or road base to 5 cm. Open the document |
| landscape density roadbase compacted Concrete slab, Pavers, Soil, gravel and mulch | 2.4 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: road base/DGB/FCR 2.4 t/m3 (compacted figure). Open the document |
| concrete mesh effective length Concrete slab, Reo mesh | 5.8 m | Verified 2026-11-18 | InfraBuild ribbed square mesh page: SL72 and SL82 effective area 5.8 x 2.4 m. Open the document |
| concrete mesh effective width Concrete slab, Reo mesh | 2.4 m | Verified 2026-11-18 | InfraBuild ribbed square mesh page: SL72 and SL82 effective area 5.8 x 2.4 m. Open the document |
Concrete for posts calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| concrete post hole width factor Concrete for posts, Fence | 2 x post width | Verified 2026-11-18 | Bunnings Easy Mix Post Mix technical data sheet: hole width = 2 x width or diameter of the post. Open the document |
| concrete post hole depth fraction Concrete for posts | 33.3 % of post length | Verified 2026-11-18 | Bunnings Easy Mix Post Mix technical data sheet: hole depth = 1/3 of the length of the post. Open the document |
| concrete bag yield 20kg Concrete for posts | 0.01 m3 | Verified 2026-11-18 | Bunnings Easy Mix Post Mix Concrete technical data sheet: 1 x 20 kg bag = 0.01 m3 (100 bags = 1.0 m3). Open the document |
| concrete post bags per hole Concrete for posts, Fence | 2 bags (20 kg) | Verified 2026-11-18 | Bunnings Easy Mix Post Mix technical data sheet: use approximately two 20 kg bags per post hole. Open the document |
Reo mesh calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| reo sl62 mass Reo mesh | 33 kg/sheet | Verified 2026-11-18 | Ausreo reinforcing mesh page: SL62 sheet, 33 kg, 5.8 x 2.4 m effective. Open the document |
| concrete mesh sl72 mass Reo mesh | 41 kg/sheet | Verified 2026-11-18 | InfraBuild ribbed square mesh page: SL72 mass per sheet 41 kg (6.75 mm wires at 200 mm). Open the document |
| concrete mesh sl82 mass Reo mesh | 52 kg/sheet | Verified 2026-11-18 | InfraBuild ribbed square mesh page: SL82 mass per sheet 52 kg (7.6 mm wires at 200 mm). Open the document |
| reo mesh lap Reo mesh | 225 mm | Editable default | Marshall Steel guide: 225 mm minimum lap between mesh sheets on residential slabs (Danterr says about 300 mm). Your engineer's drawing gives the lap. |
| reo chair max spacing Reo mesh | 800 mm | Verified 2026-11-18 | NCC 2019 Volume Two, clause 3.2.3.2(f)(v): bar chairs at no more than 800 mm centres for steel fabric. Open the document |
| concrete mesh cover bottom Reo mesh | 50 mm | Verified 2026-11-18 | Cement Australia how to lay a concrete slab: reinforcement at least 5 cm above the compacted base. Open the document |
| concrete mesh cover top Reo mesh | 40 mm | Verified 2026-11-18 | Cement Australia how to lay a concrete slab: reinforcement around 4 cm below the top of the slab. Open the document |
| concrete mesh edge clearance Reo mesh | 50 mm | Verified 2026-11-18 | Cement Australia how to lay a concrete slab: leave 5 cm between the formwork and the ends of the bars. Open the document |
Bricks calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| brick work length Bricks | 230 mm | Verified 2026-11-18 | Littlehampton Brick: standard Australian clay brick work size 230 x 110 x 76 mm. Open the document |
| brick work height Bricks | 76 mm | Verified 2026-11-18 | Littlehampton Brick: standard Australian clay brick work size 230 x 110 x 76 mm. Open the document |
| brick joint Bricks | 10 mm | Verified 2026-11-18 | Littlehampton Brick: bricks per square metre are given for 10 mm mortar joints. Open the document |
| brick per m2 check Bricks | 48.5 bricks/m2 | Verified 2026-11-18 | Littlehampton Brick: 48.5 bricks per square metre including mortar for 230 x 76 mm bricks (the tool works this out from the size and joint). Open the document |
| brick waste Bricks | 3 % | Verified 2026-11-18 | Littlehampton Brick: 50 bricks per square metre once 3% wastage is added. Other sources suggest 5 to 10% for cuts and breakage: change it if your job has many cuts. Open the document |
| mortar bricks per 20kg bag Bricks, Mortar | 20 bricks/bag | Verified 2026-11-18 | Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 20 house bricks at a 10 mm joint. Open the document |
| mortar litres per 20kg bag Bricks, Mortar | 11 L/bag | Verified 2026-11-18 | Cement Australia Mortar Mix data sheet: one 20 kg bag yields about 11 litres of mortar. Open the document |
| mortar waste Bricks, Concrete blocks, Mortar | 10 % | Editable default | Editable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb. |
Concrete blocks calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| block length Concrete blocks | 390 mm | Verified 2026-11-19 | National Masonry Masonry Design Guide (Book 2): the nominal block face is 400 mm long x 200 mm high; with 10 mm mortar joints the actual face size is 390 mm x 190 mm. Open the document |
| block height Concrete blocks | 190 mm | Verified 2026-11-19 | National Masonry Masonry Design Guide (Book 2): the actual face size of the block is 390 mm x 190 mm. Open the document |
| block joint Concrete blocks | 10 mm | Verified 2026-11-19 | National Masonry Masonry Design Guide (Book 2): an allowance is made for 10 mm wide mortar joints, which gives 12.5 blocks per square metre. Open the document |
| block mortar m3 per m2 Concrete blocks | 0.012 m3/m2 | Editable default | Rule of thumb, not a maker's figure: about 0.012 to 0.015 m3 of site-mixed mortar per square metre of block wall; the low end is used. |
| block per 20kg mortar bag Concrete blocks, Mortar | 10 blocks/bag | Verified 2026-11-18 | Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint. Open the document |
| block corefill m3 per m2 140 Concrete blocks | 0.078 m3/m2 | Verified 2026-11-19 | Adbri Masonry Besser Block and Brick brochure (NSW, April 2022), grout table: block 15.42 (140 mm series) takes 0.078 cubic metres of grout per square metre of wall with every core filled. Open the document |
| block corefill m3 per m2 190 Concrete blocks | 0.114 m3/m2 | Verified 2026-11-19 | Adbri Masonry Besser Block and Brick brochure (NSW, April 2022), grout table: blocks 20.42 and 20.48 (190 mm series) take 0.114 cubic metres of grout per square metre of wall with every core filled. Open the document |
| block corefill m3 per m2 290 Concrete blocks | 0.18 m3/m2 | Verified 2026-11-19 | Adbri Masonry Besser Block and Brick brochure (NSW, April 2022), grout table: block 30.48 (290 mm series) takes 0.18 cubic metres of grout per square metre of wall with every core filled. Open the document |
| block waste plain Concrete blocks | 5 % | Editable default | Rule of thumb, not a maker's figure: 5% for a plain rectangular wall, up to 10% with corners and openings. |
| block waste complex Concrete blocks | 10 % | Editable default | Rule of thumb, not a maker's figure: 10% for a wall with corners, openings and cut blocks. |
Mortar calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| mortar sand cement ratio m3 Mortar | 6 parts sand per 1 cement | Verified 2026-11-19 | National Masonry Masonry Design Guide (Book 2), materials for 1 cubic metre of mortar: M3 mix in 1:1:6 proportions (cement : lime : sand). Open the document |
Paint calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| paint coverage per litre Paint | 16 m2/L | Verified 2026-11-18 | Dulux paint calculator page: estimates assume two-coat topcoat coverage at a spread rate of 16 m2 per litre (check the can). Open the document |
| paint coverage per litre (New Zealand) Paint | 11 m2/L | Verified 2026-11-18 | Resene paint calculator page: example uses Resene SpaceCote Low Sheen at a theoretical spreading rate of 11 m2/L; read the product data sheet. Open the document |
| paint coats Paint | 2 coats | Verified 2026-11-18 | Dulux paint calculator page: assumes 2 coats of topcoat, the ideal number for most Dulux paints. Open the document |
| paint waste Paint | 10 % | Editable default | common trade rule of thumb for touch-ups and spillage, editable |
| paint door area Paint | 1.7 m2 | Editable default | approx. standard 2040 x 820 mm internal door, editable |
| paint window area Paint | 1.5 m2 | Editable default | typical window opening, editable |
| paint can size 1l Paint | 1 L | Verified 2026-11-18 | Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L. Open the document |
| paint can size 2l Paint | 2 L | Verified 2026-11-18 | Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L. Open the document |
| paint can size 4l Paint | 4 L | Verified 2026-11-18 | Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L. Open the document |
| paint can size 10l Paint | 10 L | Verified 2026-11-18 | Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L. Open the document |
| paint can size 15l Paint | 15 L | Verified 2026-11-18 | Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L. Open the document |
Plasterboard calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| plasterboard sheet width Plasterboard | 1,200 mm | Verified 2026-11-18 | Gyprock Standard 13 mm product page lists widths 900, 1200, 1350, 1400 mm; 1200 is the common width (Plus also lists 1200 and 1350). Open the document |
| plasterboard sheet length 2400 Plasterboard | 2,400 mm | Verified 2026-11-18 | Gyprock Standard 13 mm product page lists lengths 2400, 2700, 3000, 3600, 4200, 4800, 6000 mm (stocked sizes vary by region). Open the document |
| plasterboard sheet length 2700 Plasterboard | 2,700 mm | Verified 2026-11-18 | Gyprock Standard 13 mm product page lists lengths 2400, 2700, 3000, 3600, 4200, 4800, 6000 mm (stocked sizes vary by region). Open the document |
| plasterboard sheet length 3000 Plasterboard | 3,000 mm | Verified 2026-11-18 | Gyprock Standard 13 mm product page lists lengths 2400, 2700, 3000, 3600, 4200, 4800, 6000 mm (stocked sizes vary by region). Open the document |
| plasterboard sheet length 3600 Plasterboard | 3,600 mm | Verified 2026-11-18 | Gyprock Standard 13 mm product page lists lengths 2400, 2700, 3000, 3600, 4200, 4800, 6000 mm (stocked sizes vary by region). Open the document |
| plasterboard sheet width wideline (New Zealand) Plasterboard | 1,350 mm | Verified 2026-11-18 | GIB site guide (April 2024): GIB Wideline Standard is 1350 mm wide in 10 and 13 mm. Open the document |
| plasterboard waste Plasterboard | 10 % | Editable default | common trade rule of thumb for cuts and offcuts, editable |
| plasterboard screws per m2 Plasterboard | 8 screws/m2 | Editable default | no Gyprock figure found; taken from GIB site guide (approx. 800 screws per 100 m2), editable |
| plasterboard screws per m2 (New Zealand) Plasterboard | 8 screws/m2 | Verified 2026-11-18 | GIB site guide (April 2024), fastenings coverage: screws approx. 800 per 100 m2 of plasterboard. Open the document |
| plasterboard topping per m2 Plasterboard | 0.1 kg/m2 | Verified 2026-11-18 | Gyprock Jointmaster topping page: 20 kg pail (12 L approx.), coverage 10 kg per 100 m2. Open the document |
| plasterboard basecoat per m2 Plasterboard | 0.16 kg/m2 | Verified 2026-11-18 | Gyprock Base Coat 20/45/60/90 page: coverage approx 16 kg per 100 m2; 20 kg packs. Open the document |
| plasterboard compound pack Plasterboard | 20 kg | Verified 2026-11-18 | Gyprock Base Coat 20/45/60/90 page: Base Coat 45, 60 and 90 sold in 20 kg packs. Open the document |
| plasterboard cornice length (New Zealand) Plasterboard | 3.6 m | Verified 2026-11-18 | GIB site guide (April 2024), GIB-Cove: all profiles available in 3.6 m lengths. Open the document |
| plasterboard framing centres max Plasterboard | 450 mm | Verified 2026-11-18 | Gyprock FAQ (alfresco ceilings answer): install to AS 4055 with maximum framing centres of 450 mm. Open the document |
| framing stud spacing max (New Zealand) Plasterboard | 600 mm | Verified 2026-11-18 | GIB general wall and ceiling installation guide: stud centres must not exceed 600 mm (horizontal fixing); framing to comply with NZS 3604:2011. NZS 3604 text itself not read. Open the document |
| plasterboard fastener spacing max Plasterboard | 300 mm | Verified 2026-11-18 | Gyprock FAQ (alfresco ceilings answer): fasteners at a maximum of 300 mm centres. Open the document |
| plasterboard fastener spacing max (New Zealand) Plasterboard | 300 mm | Verified 2026-11-18 | GIB general wall and ceiling installation guide: 300 mm max centres around sheet perimeter. Open the document |
Tiles calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| tile area 200x200 Tiles | 0.04 m2/tile | Verified 2026-11-18 | Beaumont Tiles size categories include 200 x 200 and 300 x 300 tiles (area computed). Open the document |
| tile area 300x300 Tiles | 0.09 m2/tile | Verified 2026-11-18 | Beaumont Tiles size categories include 200 x 200 and 300 x 300 tiles (area computed). Open the document |
| tile area 400x600 Tiles | 0.24 m2/tile | Verified 2026-11-18 | National Tiles Muralla Ocre product page: 400 x 600 x 9 mm tile (area computed). Open the document |
| tile waste straight Tiles | 10 % | Verified 2026-11-18 | National Tiles flooring tile area calculator: straight/standard layout 10%. Open the document |
| tile waste diagonal Tiles | 15 % | Verified 2026-11-18 | National Tiles flooring tile area calculator: diagonal or complex layout 15%. Open the document |
| tile waste herringbone Tiles | 30 % | Verified 2026-11-18 | National Tiles flooring tile area calculator: herringbone or intricate pattern 30%. Open the document |
| tile adhesive coverage 6mm Tiles | 14 m2 per 20 kg bag | Verified 2026-11-18 | Sika Davco Ceramaflex page: 20 kg bag covers approx. 14 m2 with a 6 mm notch trowel. Open the document |
| tile adhesive coverage 6mm cement Tiles | 6.5 m2 per 20 kg bag | Verified 2026-11-18 | Sika Davco Ceramacrete page: 20 kg bag covers approx. 6-7 m2 with a 6 mm notched trowel (midpoint). Open the document |
| tile adhesive coverage 10mm Tiles | 6.5 m2 per 20 kg bag | Verified 2026-11-18 | Sika Davco SMP EVO page: 20 kg bag covers approx. 6-7 m2 with a 10 mm notched trowel (midpoint). Open the document |
| tile grout 300x300x10 3mm Tiles | 0.5 kg/m2 | Verified 2026-11-18 | Sika Davco Sanitized Colorgrout coverage table: 300x300x10 mm tile, 3 mm joint, 0.5 kg/m2. Open the document |
| tile grout waste Tiles | 10 % | Verified 2026-11-18 | Sika Davco Sanitized Colorgrout page: add 10-15% more material for wastage (low end used). Open the document |
Flooring calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| flooring pack coverage example Flooring | 2.888 m2/box | Verified 2026-11-18 | Hybrid Floors Australia: 15 mm oak engineered planks (1900 x 190 mm) cover 2.888 m2 per box. An example only: read the coverage printed on your own box. Open the document |
| flooring underlay roll Flooring | 20 m2/roll | Verified 2026-11-18 | Hybrid Floors Australia: foam underlay is sold in 20 m2 rolls (moisture film in 100 m2 rolls). Open the document |
| flooring expansion gap Flooring | 10 mm | Editable default | Rule of thumb, not a maker's figure: an expansion gap of 10 to 12 mm around walls and fixed objects. Follow your flooring maker's instructions. |
| flooring waste straight Flooring | 10 % | Editable default | Hybrid Floors Australia (a flooring retailer) adds 10% for cuts on plank flooring laid straight. |
| flooring waste diagonal Flooring | 15 % | Editable default | Rule of thumb, not a maker's figure: 15% for a diagonal (45 degree) layout. |
| flooring waste herringbone Flooring | 15 % | Editable default | Hybrid Floors Australia (a flooring retailer) adds 15% for herringbone; a complex pattern may need more. |
Pavers calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| paver per m2 400x400 Pavers | 6.25 pavers/m2 | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC): Euro Stone 400 x 400 x 40 mm, 6.25 units per m2. Open the document |
| paver per m2 600x400 Pavers | 4.16 pavers/m2 | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC): Euro Stone 600 x 400 x 40 mm, 4.16 units per m2. Open the document |
| paver per m2 400x200 Pavers | 12.5 pavers/m2 | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC): Havenslab 400 x 200 x 40 mm, 12.50 units per m2. Open the document |
| paver per m2 200x100 Pavers | 50 pavers/m2 | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC): Havenbrick 200 x 100 x 40 mm, 50 units per m2. Open the document |
| paver waste Pavers | 5 % | Verified 2026-11-18 | Adbri Masonry Ultimate Outdoor Planning Guide: with the Concrete Masonry Association of Australia, order an extra 5% for cuts and breakages. Open the document |
| paver roadbase depth Pavers | 75 mm | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC) flexible installation: compacted road base min 75 mm (also 'enough for 75 mm compacted depth' in its how-to checklist). Open the document |
| paver bedding sand depth Pavers | 25 mm | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC) flexible installation cross section: bedding sand nominal 25 mm (its how-to checklist allows sand for 30 mm). Open the document |
| paver excavation depth Pavers | 170 mm | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC) how to lay pavers, step 1: excavate approx. 170 mm deep. Open the document |
| paver min fall Pavers | 2 % | Verified 2026-11-18 | Adbri Masonry paving brochure (VIC): minimum gradient 2% (100 mm per 5 lineal metres). Open the document |
| landscape density sand brickies Pavers, Soil, gravel and mulch | 1.45 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: brickies sand 1.45 t/m3. Open the document |
Soil, gravel and mulch calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| landscape compaction allowance Soil, gravel and mulch | 15 % | Editable default | common rule of thumb for settling of loose fill when compacted, editable |
| landscape bag size 25l Soil, gravel and mulch | 25 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape bag size 30l Soil, gravel and mulch | 30 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape bag size 40l Soil, gravel and mulch | 40 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape bag size 50l Soil, gravel and mulch | 50 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape density topsoil Soil, gravel and mulch, Turf | 1.4 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: topsoil 1.4 t/m3. Open the document |
| landscape density garden mix Soil, gravel and mulch | 1.2 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: garden mix 1.2 t/m3. Open the document |
| landscape density sand river Soil, gravel and mulch | 1.5 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: river sand 1.5 t/m3. Open the document |
| landscape density bluemetal Soil, gravel and mulch, Retaining wall | 1.45 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: blue metal 1.45 t/m3. Open the document |
| landscape density gravel river Soil, gravel and mulch | 1.55 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: river gravel 1.55 t/m3. Open the document |
| landscape density roadbase loose Soil, gravel and mulch | 1.75 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: road base/DGB/FCR 1.75 t/m3 (indicative, loose). Open the document |
| landscape density mulch woodchip Soil, gravel and mulch | 0.4 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: woodchip mulch 0.4 t/m3. Open the document |
| landscape density mulch bark Soil, gravel and mulch | 0.3 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: bark mulch 0.3 t/m3. Open the document |
| landscape mulch depth Soil, gravel and mulch | 100 mm | Verified 2026-11-18 | Australian Native Landscapes mulch FAQ: mulch should be applied to a depth of 100 mm (Gardening Australia suggests 20-60 mm for coarse mulch). Open the document |
| landscape mulch depth light Soil, gravel and mulch | 75 mm | Editable default | commonly quoted 75 mm garden bed mulch depth, editable |
| landscape topsoil lawn depth Soil, gravel and mulch, Turf | 100 mm | Editable default | typical topsoil depth for a new lawn, rule of thumb, editable |
| landscape gravel path depth Soil, gravel and mulch | 50 mm | Editable default | typical gravel path top layer over compacted base, rule of thumb, editable |
Turf calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| turf roll area Turf | 1 m2/roll | Verified 2026-11-18 | Musturf and AG Turf Supplies: most turf rolls in Australia cover 1 square metre. Open the document |
| turf waste Turf | 5 % | Editable default | Editable allowance for cuts and edges. No Australian grower figure found: a common turfing rule of thumb. |
Retaining wall calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| retaining sleeper length 1800 Retaining wall | 1,800 mm | Verified 2026-11-18 | Outwest Sleepers (Victorian supplier): concrete sleepers are supplied in 1800, 2000 and 2400 mm lengths. Open the document |
| retaining sleeper length 2000 Retaining wall | 2,000 mm | Verified 2026-11-18 | Outwest Sleepers (Victorian supplier): concrete sleepers are supplied in 1800, 2000 and 2400 mm lengths. Open the document |
| retaining sleeper length 2400 Retaining wall | 2,400 mm | Verified 2026-11-18 | Outwest Sleepers (Victorian supplier): concrete sleepers are supplied in 1800, 2000 and 2400 mm lengths. Open the document |
| retaining sleeper height Retaining wall | 200 mm | Editable default | Typical sleeper face height. No Australian supplier figure was read for this: check the height of the sleeper you will buy and change it. |
| retaining post spacing min Retaining wall | 1.2 m | Verified 2026-11-18 | RetWall: post spacing is typically 1.2 m for tall walls up to 2.4 m for shorter walls (concrete sleeper walls). The engineer sets the real spacing. Open the document |
| retaining post spacing max Retaining wall | 2.4 m | Verified 2026-11-18 | RetWall: post spacing is typically 1.2 m for tall walls up to 2.4 m for shorter walls (concrete sleeper walls). The engineer sets the real spacing. Open the document |
| retaining footing depth low Retaining wall | 600 mm | Verified 2026-11-18 | RetWall: footing depth typically 600 mm for low walls, up to 1500 mm or more for walls approaching 2.4 m. Open the document |
| retaining engineer height Retaining wall | 0.6 m | Editable default | RetWall (a retaining wall company, not an authority): engineering or a permit is typically required above 0.60 m of retained height, or for any wall on a boundary. Other sources say about 1 m: rules differ by state and council. |
| retaining drain gravel width Retaining wall | 300 mm | Editable default | Adbri Masonry Versawall retaining wall detail (a block wall): a 300 mm column of 20 mm drainage aggregate behind the wall, with a 100 mm socked subsoil drain at the base. Sleeper wall makers give their own detail. |
Fence calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| fence timber post spacing max Fence | 2.4 m | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: rails 100 x 38 mm allow 2400 mm max post spacing (2100 mm with 75 x 38 mm rails). Open the document |
| fence timber rails up to 1200 Fence | 2 rails | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: two rails for paling fences up to 1200 mm high. Open the document |
| fence timber rails over 1200 Fence | 3 rails | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: fences over 1200 mm and up to 1800 mm high require three rails. Open the document |
| fence paling width 100 Fence | 100 mm | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: commonly used paling sizes are 100 x 15 mm and 75 x 15 mm. Open the document |
| fence paling width 75 Fence | 75 mm | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: commonly used paling sizes are 100 x 15 mm and 75 x 15 mm. Open the document |
| fence paling gap default Fence | 0 mm | Editable default | Palings are laid edge to edge by default. Timber shrinks, so many builders leave a small gap; type your own gap. |
| fence steel panel width 2sheet Fence | 1,582 mm | Verified 2026-11-18 | Lysaght fence and gate installation guide (non-cyclonic) Table 6.1: panel width 1582 mm with 2 infill sheets. Open the document |
| fence steel panel width 3sheet Fence | 2,350 mm | Verified 2026-11-18 | Lysaght fence and gate installation guide (non-cyclonic) Table 6.1: panel width 2350 mm with 3 infill sheets (post spacing = panel width). Open the document |
| fence steel panel width 4sheet Fence | 3,100 mm | Verified 2026-11-18 | Lysaght fence and gate installation guide (non-cyclonic) Table 6.1: panel width 3100 mm with 4 infill sheets. Open the document |
| fence timber post depth Fence | 600 mm | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: posts about 600 mm deep for fences 1200-1800 mm high (450 mm up to 1200 mm). Open the document |
Decking calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| deck gap hardwood Decking | 3 mm | Verified 2026-11-18 | ATFA Residential Timber Decks guide: 3 mm gap for hardwood or cypress boards up to 90 mm wide, not close to the ground. Open the document |
| deck gap softwood Decking | 5 mm | Verified 2026-11-18 | ATFA Residential Timber Decks guide: 5 mm gap for softwood boards (and 130 mm hardwood). Use at least 5 mm close to the ground or over a slab. Open the document |
| deck joist spacing hardwood 19 Decking | 500 mm | Verified 2026-11-18 | WoodSolutions TDG 21 Table 2: maximum joist spacing 500 mm for 19 mm hardwood decking (AS 2796). Open the document |
| deck joist spacing cypress 19 Decking | 400 mm | Verified 2026-11-18 | WoodSolutions TDG 21 Table 2: maximum joist spacing 400 mm for 19 mm cypress decking (AS 1810). Open the document |
| deck joist spacing cypress 21 Decking | 450 mm | Verified 2026-11-18 | WoodSolutions TDG 21 Table 2: maximum joist spacing 450 mm for 21 mm cypress decking. Open the document |
| deck joist spacing pine 19 Decking | 400 mm | Verified 2026-11-18 | WoodSolutions TDG 21 Table 2: maximum joist spacing 400 mm for 19 mm treated softwood decking (AS 4785). Open the document |
| deck joist spacing pine 22 Decking | 450 mm | Verified 2026-11-18 | WoodSolutions TDG 21 Table 2: maximum joist spacing 450 mm for 22 mm treated softwood decking. Open the document |
| deck fixings per joist Decking | 2 fixings | Verified 2026-11-18 | WoodSolutions TDG 21 and ATFA: at least two nails or screws per board at each joist crossing. Open the document |
| deck waste Decking | 10 % | Editable default | Editable allowance for cuts and defects. None of the Australian timber guides read gives a figure: a common decking rule of thumb. |
Roofing sheets calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| roof cover custom orb Roofing sheets | 762 mm | Verified 2026-11-18 | Lysaght Custom Orb (corrugated) profile: cover width 762 mm. Open the document |
| roof cover trimdek Roofing sheets | 762 mm | Verified 2026-11-18 | Lysaght Roofing and Walling Installation Manual: Trimdek cover width 762 mm. Open the document |
| roof cover klip lok 406 Roofing sheets | 406 mm | Verified 2026-11-18 | Lysaght Roofing and Walling Installation Manual: Klip-Lok 406 cover width 406 mm. Open the document |
| roof cover klip lok 700 Roofing sheets | 700 mm | Verified 2026-11-18 | Lysaght Roofing and Walling Installation Manual: Klip-Lok 700 cover width 700 mm. Open the document |
| roof screws trimdek 900 Roofing sheets | 6 screws/m2 | Verified 2026-11-18 | Lysaght Installation Manual Table 3.8: Trimdek needs 6 screws per m2 at 900 mm support spacing. Open the document |
| roof screws trimdek 1200 Roofing sheets | 5 screws/m2 | Verified 2026-11-18 | Lysaght Installation Manual Table 3.8: Trimdek needs 5 screws per m2 at 1200 mm support spacing. Open the document |
| roof screws custom orb 900 Roofing sheets | 5 screws/m2 | Verified 2026-11-18 | Lysaght Installation Manual Table 3.8: Custom Orb (3 fasteners per sheet width) needs 5 screws per m2 at 900 mm support spacing. Open the document |
| roof screws custom orb 1200 Roofing sheets | 4 screws/m2 | Verified 2026-11-18 | Lysaght Installation Manual Table 3.8: Custom Orb (3 fasteners per sheet width) needs 4 screws per m2 at 1200 mm support spacing. Open the document |
| roof ridge capping length 2400 Roofing sheets | 2,400 mm | Verified 2026-11-18 | Lysaght Flashing Guide: standard ridge capping lengths 2400 and 1800 mm (Victoria). Open the document |
| roof min pitch custom orb Roofing sheets | 5 degrees | Verified 2026-11-18 | Lysaght Flashing Guide: minimum pitch for Custom Orb is 5 degrees. Open the document |
| roof min pitch trimdek Roofing sheets | 2 degrees | Verified 2026-11-18 | Lysaght Flashing Guide: minimum pitch for Trimdek is 2 degrees. Open the document |
| roof min pitch klip lok 406 Roofing sheets | 1 degrees | Verified 2026-11-18 | Lysaght Flashing Guide: minimum pitch for Klip-Lok 406 is 1 degree. Open the document |
| roof min pitch klip lok 700 Roofing sheets | 2 degrees | Verified 2026-11-18 | Lysaght Roofing and Walling Installation Manual: Klip-Lok 700 Hi-Strength needs a pitch of 2 degrees (1 in 30) in 0.42 mm steel and 1 degree (1 in 50) in 0.48 and 0.60 mm: the higher figure is used. Open the document |
| roof waste Roofing sheets | 5 % | Editable default | Editable allowance for cut sheets. No Australian manufacturer figure was found: a common roofing rule of thumb. |
Weatherboard cladding calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| cladding linea150 cover Weatherboard cladding | 120 mm | Verified 2026-11-18 | James Hardie Linea installation guide: Linea 150 mm board, 4200 mm long, effective cover 120 mm after a 30 mm lap. Open the document |
| cladding linea180 cover Weatherboard cladding | 150 mm | Verified 2026-11-18 | James Hardie Linea installation guide: Linea 180 mm board, 4200 mm long, effective cover 150 mm after a 30 mm lap. Open the document |
| cladding linea length Weatherboard cladding | 4,200 mm | Verified 2026-11-18 | James Hardie Linea installation guide: Linea boards are 4200 mm long. Open the document |
| cladding stria325 cover Weatherboard cladding | 300 mm | Verified 2026-11-18 | James Hardie Stria Cladding Smooth 325 mm: effective width 300 mm, lengths 3000 and 4200 mm. Open the document |
| cladding stria405 cover Weatherboard cladding | 380 mm | Verified 2026-11-18 | James Hardie Stria Cladding Smooth 405 mm: effective width 380 mm, lengths 3000 and 4200 mm. Open the document |
| cladding stria length Weatherboard cladding | 4,200 mm | Verified 2026-11-18 | James Hardie Stria Cladding Smooth: lengths 3000 and 4200 mm (the longer length is used). Open the document |
| cladding plank230 cover Weatherboard cladding | 205 mm | Verified 2026-11-18 | James Hardie HardiePlank 230 mm board: effective cover 205 mm after a 25 mm overlap, 4200 mm long. Open the document |
| cladding plank300 cover Weatherboard cladding | 275 mm | Verified 2026-11-18 | James Hardie HardiePlank 300 mm board: effective cover 275 mm after a 25 mm overlap, 4200 mm long. Open the document |
| cladding plank length Weatherboard cladding | 4,200 mm | Verified 2026-11-18 | James Hardie HardiePlank boards are 4200 mm long. Open the document |
| cladding stria325 pack Weatherboard cladding | 60 boards/pack | Verified 2026-11-18 | James Hardie Stria Cladding Smooth 325 mm: 60 pieces per pack. Open the document |
| cladding stria405 pack Weatherboard cladding | 40 boards/pack | Verified 2026-11-18 | James Hardie Stria Cladding Smooth 405 mm: 40 pieces per pack. Open the document |
| cladding plank pack Weatherboard cladding | 120 boards/pack | Verified 2026-11-18 | James Hardie HardiePlank 230 and 300 mm: 120 pieces per pack. Open the document |
| cladding corner length Weatherboard cladding | 3,600 mm | Verified 2026-11-18 | James Hardie Linea installation guide: aluminium external slimline boxed corner, 3600 mm long. Open the document |
| cladding snap corner length Weatherboard cladding | 3,000 mm | Verified 2026-11-18 | James Hardie External Cladding Technical Specification: aluminium snap-on corner, 3000 mm long, 2 pieces per set (used for Stria and HardiePlank). Open the document |
| cladding waste Weatherboard cladding | 10 % | Editable default | Rule of thumb: 8 to 10% for a plain wall, 10 to 12% with a few windows and a door, up to 15 to 20% for complex walls. We found no manufacturer figure. |
Wall framing calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| framing stud spacing 450 Wall framing | 450 mm | Editable default | Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real spacing. |
| framing stud spacing 600 Wall framing | 600 mm | Editable default | Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real spacing. |
| framing noggin max gap Wall framing | 1,350 mm | Editable default | Bunnings how-to video: noggins at no more than 1350 mm between the top and bottom plates, with a second row for walls over 2.7 m. Check AS 1684 for your wall. |
| framing waste Wall framing | 10 % | Editable default | Editable allowance for cuts and rejected lengths. No Australian source read gives a figure: a common framing rule of thumb. |
Insulation batts calculator
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| insulation pack wall r2 430 Insulation batts | 11 m2/pack | Verified 2026-11-18 | Ambisol (Bradford Gold wall batts R2.0, 430 x 1160 mm): 11.0 m2 per pack. Open the document |
| insulation pack wall r2 580 Insulation batts | 12.2 m2/pack | Editable default | Bradford Gold wall batts R2.0, 580 x 1160 mm: 12.2 m2 per pack (retailer listing, second-hand figure). |
| insulation pack ceiling r25 Insulation batts | 10.8 m2/pack | Editable default | Bradford Gold ceiling batts R2.5: 10.8 m2 per pack (retailer listing, second-hand figure). |
| insulation pack ceiling r35 Insulation batts | 8 m2/pack | Editable default | Bradford Gold ceiling batts R3.5: 8.0 m2 per pack (retailer listing, second-hand figure). |
| insulation pack ceiling r41 Insulation batts | 5 m2/pack | Editable default | Bradford Gold ceiling batts R4.1: 5.0 m2 per pack (retailer listing, second-hand figure). |
| insulation waste Insulation batts | 5 % | Editable default | Editable allowance for cuts (5%). We found no manufacturer figure. |
More checked figures
| Setting | Value | Status | Where it comes from |
|---|---|---|---|
| concrete bag yield 30kg | 0.0151 m3 | Verified 2026-11-18 | Bunnings Easy Mix Post Mix Concrete technical data sheet: 1 x 30 kg bag = 0.0151 m3 (67 bags = 1.0 m3). Open the document |
| concrete control joint spacing | 1.5 m | Verified 2026-11-18 | Cement Australia how to lay a concrete slab: cut control joints about 2 cm deep at 150 cm intervals on larger slabs. Open the document |
| paver vehicle min thickness | 50 mm | Verified 2026-11-18 | Adbri Masonry Ultimate Outdoor Planning Guide: for vehicular traffic the paver must be at least 50 mm thick and small format, unless on an engineered concrete base. Open the document |
| paver joint gap | 3 mm | Verified 2026-11-18 | Adbri Masonry Ultimate Outdoor Planning Guide: on a flexible base pavers must be laid with a 3 mm gap to avoid chipping. Open the document |
| paint primer coverage per litre | 12 m2/L | Verified 2026-11-18 | Dulux paint calculator page: one-coat preparation products at 12 m2 per litre. Open the document |
| plasterboard thickness 10 | 10 mm | Verified 2026-11-18 | Gyprock Plus (residential standard) product page: 10 mm thick. Open the document |
| plasterboard thickness 13 | 13 mm | Verified 2026-11-18 | Gyprock Standard 13 mm product page: thickness 13 mm. Open the document |
| landscape bags per m3 25l | 40 bags/m3 | Verified 2026-11-18 | Australian Native Landscapes delivery page: 40 x 25 L bags make 1 cubic metre. Open the document |
| fence timber post spacing light rail | 2.1 m | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: 75 x 38 mm rails, 2100 mm max post spacing. Open the document |
| fence timber height max | 1,800 mm | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: recommendations cover domestic timber fences up to 1800 mm. Open the document |
| fence timber post hole diameter | 300 mm | Verified 2026-11-18 | Timber Queensland TDS 20 Residential Timber Fences: post holes minimum 300 mm diameter. Open the document |
| fence steel footing diameter | 200 mm | Verified 2026-11-18 | Lysaght fence and gate installation guide (non-cyclonic) section 7: footings in Table 7.1 are 200 mm diameter. Open the document |
| fence steel height 1800 | 1,800 mm | Verified 2026-11-18 | Lysaght SMARTASCREEN page: panel heights 1500, 1800 and 2100 mm. Open the document |
| tile grout 200x100x6 3mm | 0.6 kg/m2 | Verified 2026-11-18 | Sika Davco Sanitized Colorgrout coverage table: 200x100x6 mm tile, 3 mm joint, 0.6 kg/m2. Open the document |
| tile grout 100x100x6 3mm | 0.8 kg/m2 | Verified 2026-11-18 | Sika Davco Sanitized Colorgrout coverage table: 100x100x6 mm tile, 3 mm joint, 0.8 kg/m2. Open the document |
| plasterboard sheet length 3300 (New Zealand) | 3,300 mm | Verified 2026-11-18 | GIB site guide (April 2024) GIB Standard lengths include 2400, 2700, 3000, 3300, 3600, 4200, 4800, 6000 mm. Open the document |