EnoughToGet CalculatorsGuides

Paint & plaster

How much paint for a living room?

By the EnoughToGet teamUpdated 2026-11-184 min readSources and assumptions

For a 5 by 4 metre living room with 2.7 metre walls, two doors and two windows, the calculator gives 5.8 litres for the walls only in Australia and 8.55 litres when the ceiling is included.

Try itPaint: enter your own sizes
m
Type metres, for example 4.2.
m
m
Each door is taken off the wall area.
Each window is taken off the wall area.
The ceiling uses the same paint here. Ceiling paint is often a different product.
Two coats is the usual advice on the label.
%
Covers rough surfaces and touch-ups.
You need
5.8 L
buy 6 L in cans

Shopping list

ItemBuyNote
Paint needed5.8 L2 coats over 42.2 m²
4 L can1 can6 L bought in total
2 L can1 can6 L bought in total
  • Coverage is 16 m² per litre (Dulux calculator). Check the spread rate on your can: textured walls and dark colours use more.
How this was worked out
  1. Wall area: perimeter × height
    2 × (5 + 4) × 2.7 = 48.6 m²
  2. Minus openings: walls − doors × door area − windows × window area
    48.60 − 2 × 1.7 − 2 × 1.5 = 42.2 m²
  3. Paint needed: area × coats × (1 + waste) ÷ coverage
    42.20 × 2 × 1.10 ÷ 16 = 5.8 L

How the paint amount is worked out

The calculator starts with wall area: perimeter times height. For this room, 2 × (5 + 4) × 2.7 = 48.6 square metres. It then subtracts the openings: 2 doors at 1.7 square metres each and 2 windows at 1.5 square metres each, giving 42.2 square metres. For walls and ceiling, it adds the ceiling area of 5 × 4 = 20 square metres, making 62.2 square metres. It then applies 2 coats and a 10% waste allowance through the (1 + waste) factor. Finally, it divides by coverage: 16 square metres per litre in Australia, the spread rate the Dulux paint calculator page uses, or 11 square metres per litre in New Zealand, the theoretical spreading rate in the Resene paint calculator page's example using Resene SpaceCote Low Sheen (check the spread rate on your can). The result is 5.8 litres for Australian walls only, 8.44 litres in New Zealand, 8.55 litres for Australian walls and ceiling, and 12.44 litres in New Zealand. The headline is rounded to a buyable can total: 6, 9, 9 and 13 litres.

What changes the answer

The main changes are the room size, the ceiling, the coverage rate and the openings. Adding the ceiling adds 20 square metres, so the Australian total rises from 5.8 to 8.55 litres and the New Zealand total rises from 8.44 to 12.44 litres. Coverage is 16 square metres per litre in the Dulux paint calculator page's estimate and 11 square metres per litre in the Resene paint calculator page's example (Resene SpaceCote Low Sheen), so the same area needs more litres at the lower spread rate; check the spread rate on your can. The calculator assumes 2 coats. It subtracts 2 doors at 1.7 square metres each and 2 windows at 1.5 square metres each. Waste is 10%. If your walls are textured or the colour is dark, the spread rate on your can may be lower, so check the can. The calculator's can list then splits the litre total into 1, 2, 4 and 10 litre cans.

Quick reference table

The table copies the calculator's four results for a 5 by 4 metre room with 2.7 metre walls, two doors and two windows. Paint needed is the calculated volume; the can list is the rounded purchase. Use the row that matches your country and whether you are painting the ceiling. The can list shows how the rounded total is split into available packs. The headline litres are 5.8, 8.44, 8.55 and 12.44; the buy totals are 6, 9, 9 and 13 litres.

CasePaint neededCans to buy
Australia, walls only5.8 L4 L × 1, 2 L × 1
New Zealand, walls only8.44 L4 L × 2, 1 L × 1
Australia, walls and ceiling8.55 L4 L × 2, 1 L × 1
New Zealand, walls and ceiling12.44 L10 L × 1, 2 L × 1, 1 L × 1

Worked example

Worked example: Australia, walls only. Step 1: wall area = 48.6 square metres [perimeter × height; 2 × (5 + 4) × 2.7]. Step 2: minus openings = 42.2 square metres [walls − doors × door area − windows × window area; 48.60 − 2 × 1.7 − 2 × 1.5]. Step 3: paint needed = 5.8 litres [area × coats × (1 + waste) ÷ coverage; 42.20 × 2 × 1.10 ÷ 16]. The 1.10 factor already includes the 10% waste allowance, so do not add 10% again. The coverage is 16 square metres per litre. The rounded purchase is 6 litres in cans: one 4 litre can and one 2 litre can. If you add the ceiling, the area becomes 62.2 square metres and the result becomes 8.55 litres.

Common mistakes

Common mistakes include using 48.6 square metres instead of 42.2 square metres after subtracting doors and windows; adding the 10% waste a second time when the formula already uses (1 + waste); rounding 5.8 litres down instead of buying 6 litres in cans; using a coverage figure that does not match the spread rate on your can; and mixing units, because length, width and height must all be in metres. Another mistake is ignoring the can list: the calculator splits 5.8 litres into one 4 litre can plus one 2 litre can. For walls and ceiling, 8.55 litres becomes two 4 litre cans plus one 1 litre can, and 12.44 litres becomes one 10 litre can, one 2 litre can and one 1 litre can.

Frequently asked questions

How much paint do I need for this living room?

For walls only, the calculator gives 5.8 litres in Australia and 8.44 litres in New Zealand. With the ceiling included, it gives 8.55 litres in Australia and 12.44 litres in New Zealand.

Do I paint the ceiling as well?

Including the ceiling adds 20 square metres. The Australian total changes from 5.8 to 8.55 litres, and the New Zealand total changes from 8.44 to 12.44 litres.

Why is the New Zealand figure higher?

The New Zealand result uses 11 square metres per litre, the theoretical spreading rate in the Resene paint calculator page's example (Resene SpaceCote Low Sheen). The Australian result uses 16 square metres per litre from the Dulux paint calculator page. Check the spread rate on your can.

How many coats are assumed?

The calculator assumes 2 coats of topcoat.

What can sizes should I buy?

The shopping lists use 1, 2, 4 and 10 litre cans. The Dulux product page also lists 500 millilitre and 15 litre packs.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
paint coverage per litre16 m2/L
New Zealand: 11 m2/L
Verified 2026-11-18Dulux paint calculator page: estimates assume two-coat topcoat coverage at a spread rate of 16 m2 per litre (check the can).
paint coats2 coatsVerified 2026-11-18Dulux paint calculator page: assumes 2 coats of topcoat, the ideal number for most Dulux paints.
paint waste10 %Editable defaultcommon trade rule of thumb for touch-ups and spillage, editable
paint door area1.7 m2Editable defaultapprox. standard 2040 x 820 mm internal door, editable
paint window area1.5 m2Editable defaulttypical window opening, editable
paint can size 1l1 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 2l2 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 4l4 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 10l10 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.
paint can size 15l15 LVerified 2026-11-18Dulux Wash&Wear Low Sheen product page lists pack sizes 500 mL, 1, 2, 4, 10 and 15 L.

Keep reading