Floors & tiles
How many tiles for a kitchen floor?
To tile a kitchen floor measuring 4 m by 3.5 m using 300 x 300 mm tiles, you need 172 tiles.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Tiles, 300 × 300 mm | 172 tiles | 10% waste for a straight layout |
| Tile adhesive, 20 kg bags (Davco Ceramaflex type, 6 mm notch) | 1 bag | 14 m² per bag |
| Grout (300 × 300 × 10 mm tile, 3 mm joint) | 7.7 kg | Davco Sanitized Colorgrout coverage table |
- Buy all tiles from the same batch, and keep a few spare for repairs.
How this was worked out
- Area:
length × width + extra
4 × 3.5 + 0 = 14 m² - One tile:
from the tile size
300 × 300 mm = 0.09 m² - Tiles:
area × (1 + waste) ÷ tile area, rounded up
14.00 × 1.10 ÷ 0.09 = 171.11 tiles - Adhesive:
area ÷ coverage per 20 kg bag, rounded up
14.00 ÷ 14 = 1 bags - Grout:
area × kg per m² × (1 + waste)
14.00 × 0.5 × 1.10 = 7.7 kg
How the tile count is calculated
The calculator works out the total floor area first. For a kitchen measuring 4 m by 3.5 m, the area is 14 m². It then finds the area of a single tile from its size: 0.09 m² for a 300 x 300 mm tile. To get the quantity, it multiplies the floor area by 1.10, which is a 10% waste allowance for a straight layout, then divides by the area of one tile. That gives 171.11 tiles, which is rounded up to 172 tiles. For a 400 x 600 mm tile, the area is 0.24 m². With the same 10% waste factor, the result is 64.17 tiles, rounded up to 65 tiles. National Tiles gives 10% for a straight layout.
Factors that change the tile quantity
Several variables change the number of tiles you need to buy. The main one is the floor area, which is the length multiplied by the width. The tile size also changes the count: the 400 x 600 mm tile needs 65 tiles, while the 300 x 300 mm tile needs 172 tiles to cover the same 14 m². Beaumont Tiles lists 200 x 200 mm and 300 x 300 mm among its size categories, and a 200 x 200 mm tile covers 0.04 m². The layout changes the waste percentage. National Tiles gives 10% for a straight layout, 15% for a diagonal or complex layout, and 30% for a herringbone or intricate pattern. Adhesive quantity depends on the product and the notch size: Sika gives approx. 14 m² per 20 kg bag for Davco Ceramaflex with a 6 mm notch, and approx. 6-7 m² for Davco SMP EVO with a 10 mm notch. Grout use depends on tile size, thickness and joint width. For anything else, check your product label or supplier.
Adhesive and grout requirements
For a 14 m² area using 300 x 300 mm tiles, the calculator gives 1 bag of 20 kg tile adhesive (Davco Ceramaflex type) with a 6 mm notch trowel. Sika says a 20 kg bag of Davco Ceramaflex covers approx. 14 m² with a 6 mm notch trowel, so 14 ÷ 14 gives 1 bag. For the 400 x 600 mm tile, the calculator uses Davco SMP EVO type adhesive with a 10 mm notch, which needs 3 bags. Sika gives approx. 6-7 m² per 20 kg bag for that adhesive, and the calculator uses the midpoint of 6.5 m². So 14 ÷ 6.5 is rounded up to 3 bags. For grout, the calculator gives 7.7 kg for 300 x 300 x 10 mm tiles with 3 mm joints. That is 14 m² multiplied by 0.5 kg per m², then multiplied by 1.10. Sika says to add 10-15% more grout for wastage, and the calculator uses the low end, 10%.
Tile and material summary
The table shows the requirements for a 4 m x 3.5 m kitchen floor for each tile size and adhesive type. Grout is shown only for the 300 x 300 mm tile, because the maker's coverage table the calculator uses is for 300 x 300 x 10 mm tiles with 3 mm joints.
| Tile Size | Tile Count | Adhesive Type | Adhesive Quantity | Grout Quantity |
|---|---|---|---|---|
| 300 x 300 mm | 172 tiles | Davco Ceramaflex (6 mm notch) | 1 bag | 7.7 kg |
| 400 x 600 mm | 65 tiles | Davco SMP EVO (10 mm notch) | 3 bags |
Worked example
This section walks through the 300 x 300 mm tile option step by step. First, the floor area is the length of 4 m multiplied by the width of 3.5 m, which equals 14 m². Next, the area of one tile is 0.09 m², from the 300 x 300 mm size. To find the number of tiles, the calculator takes the 14 m² area, multiplies it by 1.10, which already includes the 10% waste, and divides by 0.09 m². This gives 171.11 tiles. Rounded up to a whole tile, you buy 172 tiles. For adhesive, 14 ÷ 14 m² per bag equals 1 bag. For grout, 14 × 0.5 kg per m² × 1.10 equals 7.7 kg.
Common mistakes about arithmetic
The calculator multiplies the area by 1.10, divides by the tile area, then rounds up to the next whole tile (171.11 becomes 172). The 1.10 already includes the 10% waste, so do not add waste a second time. Adhesive bags are also rounded up, which is why 14 ÷ 6.5 becomes 3 bags. Use metres for the floor and convert tile sizes to square metres: 300 x 300 mm is 0.09 m². The grout figure of 7.7 kg is for 300 x 300 x 10 mm tiles with 3 mm joints, so do not apply it to other tile sizes. Check your product label or supplier for other sizes.
Frequently asked questions
How much waste should I add for a straight layout?
For a straight layout, add 10%.
What is the area of a 300 x 300 mm tile?
The area of a 300 x 300 mm tile is 0.09 m².
How many bags of adhesive do I need for a 10 mm notch?
For a 14 m² area with Davco SMP EVO type adhesive and a 10 mm notch, the calculator gives 3 bags of 20 kg (14 ÷ 6.5, rounded up). For other adhesives, check your product label or supplier.
Does the grout amount change based on waste?
Yes, the grout calculation includes a 10% waste allowance.
Should I buy all tiles from the same batch?
Yes, you should buy all tiles from the same batch and keep a few spares for repairs.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.