Landscaping
How much mulch do I need?
For a garden bed measuring 4 metres by 1.5 metres, allow 0.52 m³ of woodchip mulch at 75 mm deep or 0.69 m³ at 100 mm deep.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Mulch, woodchip, bulk | 0.52 m³ | about 0.21 t at 0.4 t/m³ |
| Or bagged (30 L bags) | 18 bags | 518 L |
How this was worked out
- Area:
length × width
4 × 1.5 = 6 m² - Volume:
area × depth ÷ 1000
6.00 × 75 ÷ 1000 = 0.45 m³ - With extra:
volume × (1 + allowance)
0.450 × 1.15 = 0.52 m³ - Weight:
volume with extra × density
0.517 × 0.4 = 0.21 t - Bags (30 L):
litres with extra ÷ bag size, rounded up
518 ÷ 30 = 17.25 bags
How the calculator works
The calculator first multiplies the bed’s length by its width to find its area: 4 × 1.5 gives 6 m². It then multiplies that area by the chosen depth and divides by 1000 to convert millimetres into metres for the volume calculation. At 75 mm, the volume before an allowance is 0.45 m³; at 100 mm, it is 0.6 m³.
For these woodchip results, the calculator uses a 15% allowance, or a multiplier of 1.15, in the formula “volume × (1 + allowance)”. This produces 0.52 m³ at 75 mm and 0.69 m³ at 100 mm, with the allowance already included. The calculator then uses a woodchip density of 0.4 t/m³ to estimate weight, and converts the volume with extra into 30 L bags, rounding the bag count up to a whole bag.
Mulch amounts for the measured beds
The table compares the two depths for a 4 m by 1.5 m bed, alongside the calculator’s result for a larger 6 m by 2 m bed at 75 mm. The first two rows are woodchip mulch; the third is bark mulch, so its weight uses a different density. Bulk volume, estimated weight and bag count are shown for each calculation.
| Dimensions | Depth | Volume (m³) | Weight (t) | 30 L bags |
|---|---|---|---|---|
| 4 m x 1.5 m | 75 mm | 0.52 | 0.21 | 18 |
| 4 m x 1.5 m | 100 mm | 0.69 | 0.28 | 23 |
| 6 m x 2 m | 75 mm | 1.04 | 0.31 | 35 |
For the 4 m by 1.5 m bed, moving from 75 mm to 100 mm changes the bulk amount from 0.52 m³ to 0.69 m³ and the bag count from 18 to 23. The 6 m by 2 m bark example is a separate bed size and material, not another depth option for the smaller bed.
Worked example
For the first woodchip example, the bed measures 4 m by 1.5 m and the chosen depth is 75 mm.
- Area: Use “length × width”: 4 × 1.5 = 6 m².
- Volume: Use “area × depth ÷ 1000”: 6.00 × 75 ÷ 1000 = 0.45 m³.
- With extra: Use “volume × (1 + allowance)”: 0.450 × 1.15 = 0.52 m³. The 1.15 multiplier includes the 15% allowance, so this 0.52 m³ already includes it.
- Weight: Use “volume with extra × density”: 0.517 × 0.4 = 0.21 t.
- Bags: Use “litres with extra ÷ bag size, rounded up”: 518 ÷ 30 = 17.25 bags, which rounds up to 18 bags.
The result for this example is therefore 0.52 m³ in bulk, about 0.21 t, or 18 bags of 30 L.
What changes the amount
Depth changes the volume for the same 6 m² bed. At 75 mm, the volume before the allowance is 0.45 m³; at 100 mm, it is 0.6 m³. After the calculator applies the 15% allowance, those amounts become 0.52 m³ and 0.69 m³ respectively. Australian Native Landscapes says mulch should be applied to a depth of 100 mm; its mulch FAQ also notes Gardening Australia suggests 20–60 mm for coarse mulch. The 75 mm depth is a commonly quoted garden bed mulch depth that you can edit in the calculator.
Material affects the estimated weight because woodchip mulch uses a density of 0.4 t/m³ and bark mulch uses 0.3 t/m³. Australian Native Landscapes gives those densities in its product weights FAQ. Bag capacity also affects the count: these calculations use 30 L bags. For another product’s density or bag size, check your product label or supplier.
Common mistakes
One arithmetic mistake is stopping at the volume before the allowance. For the 4 m by 1.5 m bed at 75 mm, 0.45 m³ is the volume before extra; the calculator’s 0.52 m³ result applies the 1.15 multiplier. At 100 mm, 0.6 m³ similarly becomes 0.69 m³. Do not add another 15% to either result, because the “volume × (1 + allowance)” calculation already includes the allowance.
A second mistake is treating the 17.25-bag calculation as a purchase count. The formula says to round up, so 17.25 bags becomes 18 whole bags. The 30 L capacity also matters: the calculation divides litres with extra by 30, rather than dividing cubic metres directly by the bag capacity. Finally, keep the depth conversion in the formula: the calculator multiplies area by depth in millimetres and divides by 1000 to get cubic metres.
Frequently asked questions
How much mulch do I need for 4 m by 1.5 m at 75 mm?
Allow 0.52 m³ of woodchip mulch, about 0.21 t, or 18 bags of 30 L. The 0.52 m³ includes the calculator’s 15% allowance.
How much is needed at 100 mm deep?
The calculator gives 0.69 m³, about 0.28 t, or 23 bags of 30 L for the same 4 m by 1.5 m bed.
Why is the bag count rounded up?
At 75 mm, the calculation is 518 ÷ 30 = 17.25 bags. The working specifies rounding up, giving a whole-bag purchase count of 18.
Why does the estimated weight depend on the mulch?
The calculator uses 0.4 t/m³ for woodchip mulch and 0.3 t/m³ for bark mulch. The 6 m by 2 m bark example therefore has a different estimated weight from the woodchip examples.
What if my product has a different density or bag size?
The results here use woodchip or bark density and 30 L bags. For another product’s density or capacity, check your product label or supplier.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| landscape compaction allowance | 15 % | Editable default | common rule of thumb for settling of loose fill when compacted, editable |
| landscape bag size 25l | 25 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape bag size 30l | 30 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape bag size 40l | 40 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape bag size 50l | 50 L | Editable default | common retail bag size seen in Bunnings listings (page not fetchable), editable |
| landscape density topsoil | 1.4 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: topsoil 1.4 t/m3. |
| landscape density garden mix | 1.2 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: garden mix 1.2 t/m3. |
| landscape density sand brickies | 1.45 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: brickies sand 1.45 t/m3. |
| landscape density sand river | 1.5 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: river sand 1.5 t/m3. |
| landscape density bluemetal | 1.45 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: blue metal 1.45 t/m3. |
| landscape density gravel river | 1.55 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: river gravel 1.55 t/m3. |
| landscape density roadbase loose | 1.75 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: road base/DGB/FCR 1.75 t/m3 (indicative, loose). |
| landscape density mulch woodchip | 0.4 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: woodchip mulch 0.4 t/m3. |
| landscape density mulch bark | 0.3 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: bark mulch 0.3 t/m3. |
| landscape density roadbase compacted | 2.4 t/m3 | Verified 2026-11-18 | Australian Native Landscapes product weights FAQ: road base/DGB/FCR 2.4 t/m3 (compacted figure). |
| landscape mulch depth | 100 mm | Verified 2026-11-18 | Australian Native Landscapes mulch FAQ: mulch should be applied to a depth of 100 mm (Gardening Australia suggests 20-60 mm for coarse mulch). |
| landscape mulch depth light | 75 mm | Editable default | commonly quoted 75 mm garden bed mulch depth, editable |
| landscape topsoil lawn depth | 100 mm | Editable default | typical topsoil depth for a new lawn, rule of thumb, editable |
| landscape gravel path depth | 50 mm | Editable default | typical gravel path top layer over compacted base, rule of thumb, editable |