Floors & tiles
How many boxes of flooring do I need?
To cover a 5 m by 4 m room with a 10% waste allowance, you need 8 boxes of flooring when each box covers 2.888 m²; check the coverage printed on your own box.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Flooring boxes | 8 boxes | 10% waste for a straight layout, 2.888 m² a box |
| Underlay, 20 m² rolls | 1 roll | a foam underlay roll |
- Leave an expansion gap of about 10 mm at the walls (a calculator site's figure): follow your flooring maker's instructions.
- Buy all boxes at the same time, from the same batch.
How this was worked out
- Floor area:
length × width + extra
5 × 4 + 0 = 20 m² - Boxes:
area × (1 + waste) ÷ coverage per box, rounded up
20.00 × 1.10 ÷ 2.888 = 7.62 boxes - Underlay rolls:
area ÷ roll size, rounded up
20.00 ÷ 20 = 1 rolls
How the flooring quantity is calculated
The calculator determines the number of boxes by first finding the total floor area. This is done by multiplying the length by the width and adding any extra area. For a 5 m by 4 m room, the floor area is 20 m². Once the area is established, the calculator applies a waste percentage to account for cuts. For plank flooring laid straight, Hybrid Floors Australia and OzTradieCalc both note a 10% waste allowance. The calculator then multiplies the area by (1 + waste) and divides by the coverage per box, so the waste is already included in that step. The final result is always rounded up to the nearest whole box to ensure you have enough material to complete the job.
Understanding coverage per box
The coverage of one box is the figure the box count is divided by. Hybrid Floors Australia gives an example where 15 mm oak engineered planks (1900 x 190 mm) cover 2.888 m² per box. However, you must check your product label or supplier for the coverage of your chosen flooring, as 2.888 m² is only an example. The examples in this guide use the 2.888 m² figure. Read the coverage printed on your own box and put that number into the calculator in place of 2.888 m² before you buy.
Waste allowances for different layouts
The amount of extra material you need to order depends on how you plan to lay the floor. For a straight layout, the calculator's starting value is a 10% waste allowance. If you choose a diagonal layout (45 degree), OzTradieCalc suggests a 15% waste allowance. For a herringbone pattern, Hybrid Floors Australia suggests a 15% waste allowance, while OzTradieCalc notes that a complex pattern may need 18 to 20%. Hybrid Floors Australia says its own calculator adds 10% for cuts on plank flooring laid straight and 15% for herringbone. Always set the waste figure for your layout before calculating your final box count.
Underlay requirements
Underlay is another item you calculate from your room dimensions. Hybrid Floors Australia states that foam underlay is sold in 20 m² rolls, while moisture film is sold in 100 m² rolls. The calculator determines the number of rolls by dividing the total floor area by the roll size and rounding up to the next whole number. For a 20 m² room, you would need 1 roll of 20 m² foam underlay. For a larger 27 m² room, the calculation results in 1.35 rolls, which means you must purchase 2 rolls to cover the full area.
Important installation notes
OzTradieCalc suggests leaving an expansion gap of 10 to 12 mm around fixed vertical structures, though you must follow your flooring maker's instructions for the exact measurement. The calculator shows a gap of about 10 mm at the walls as a calculator site's figure, so check it against your flooring maker's instructions. The calculator also advises you to buy all boxes at the same time, from the same batch. For anything else about installing your flooring, check your product label or supplier.
Flooring calculations table
The following table shows the results for different room sizes using the calculator's default settings and a 10% waste allowance.
| Room Dimensions | Floor Area | Flooring Boxes | Underlay Rolls |
|---|---|---|---|
| 5 m x 4 m | 20 m² | 8 boxs | 1 roll |
| 6 m x 4.5 m | 27 m² | 11 boxs | 2 rolls |
| 3.5 m x 3 m | 10.5 m² | 4 boxs | 1 roll |
For the 6 m by 4.5 m room, the working is 27.00 × 1.10 ÷ 2.888 = 10.28 boxes, which rounds up to 11. For the 3.5 m by 3 m room, the working is 10.50 × 1.10 ÷ 2.888, which rounds up to 4 boxes.
Worked example
This section walks through the calculation for a 5 m by 4 m room to show how the final box count is reached.
First, the floor area is calculated: 5 m × 4 m + 0 extra = 20 m². Next, the total area including waste is determined: 20.00 m² × (1 + 0.10) = 22 m². This figure already includes the 10% waste allowance, so do not add waste again. Then, the number of boxes is calculated by dividing the total area by the coverage per box: 22 m² ÷ 2.888 m² = 7.62 boxes. Finally, the result is rounded up to the nearest whole number, which equals 8 boxes. For underlay, divide the 20 m² floor area by the 20 m² roll size: 20.00 ÷ 20 = 1 roll.
Common mistakes
One mistake is forgetting to round up the final box count: the calculator rounds a result of 7.62 boxes up to 8. Another mistake is using the 10% straight-lay waste allowance for every layout, when OzTradieCalc gives 15% for a diagonal layout, and Hybrid Floors Australia gives 15% for herringbone (OzTradieCalc says 18 to 20%). A third mistake is adding the waste a second time: the 22 m² figure in the worked example already includes it. Always double-check that the coverage per box used in your calculation matches the actual product you are buying from your supplier.
Frequently asked questions
How do I find the coverage per box?
Check your product label or supplier for the coverage figure, as 2.888 m² is only an example.
What waste percentage should I use for a straight lay?
The calculator starts with a 10% waste allowance for plank flooring laid straight, and Hybrid Floors Australia says its calculator adds 10% for cuts on plank flooring laid straight.
How much expansion gap is needed?
OzTradieCalc suggests an expansion gap of 10 to 12 mm around fixed vertical structures, but you must follow your flooring maker's instructions.
How many rolls of underlay do I need for a 27 m² room?
The calculator shows you need 2 rolls of 20 m² foam underlay for a 27 m² room.
Why do I need to buy all boxes at once?
The calculator advises you to buy all boxes at the same time, from the same batch.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.