EnoughToGet CalculatorsGuides

Concrete & masonry

How many besser blocks per square metre?

By the EnoughToGet teamUpdated 2026-11-184 min readSources and assumptions

You will need 12.5 besser blocks per square metre of wall, based on the 400 x 200 mm module.

Try itConcrete blocks: enter your own sizes
m
Type metres, for example 6.4.
m
m²
The thickness does not change how many blocks a square metre needs, only the core-fill and the wall.
Reinforced walls have some or all of the cores filled. Your engineer's design says which.
%
5% for a plain wall, about 10% with corners, openings and cut blocks.
You need
13 blocks
1.0 m² of 190 mm block wall

Shopping list

ItemBuyNote
Concrete blocks, 190 mm series13 blocks12.5 per m²
Mortar mix, 20 kg bags2 bagssite-mixed instead: about 0.01 m³
  • Block counts assume a 400 × 200 mm module (390 × 190 mm block and a 10 mm joint). Mortar bags follow Cement Australia (about 10 blocks to a 20 kg bag); core-fill and site-mixed mortar volumes come from calculator websites, not block makers: check with your supplier. Walls with corners, openings and many cut blocks need about 10% extra.
How this was worked out
  1. Wall area: length × height − openings
    1 × 1 − 0 = 1 m²
  2. Blocks per m²: 1 ÷ ((block length + joint) × (block height + joint))
    1 ÷ (0.4 × 0.2) = 12.5 blocks/m²
  3. Blocks needed: area × blocks per m² × (1 + waste), rounded up
    1.00 × 12.5 × 1.00 = 12.5 blocks
  4. Mortar: blocks × (1 + mortar waste) ÷ blocks per 20 kg bag, rounded up
    13 × 1.10 ÷ 10 = 1.43 bags (20 kg)

Understanding the module

The block count relies on the 400 mm by 200 mm module. Cornell Engineers describe a besser block as having a 390 mm by 190 mm face, made in 90, 140, 190 and 290 mm thick series. Add the 10 mm mortar joint and each block takes up 400 mm by 200 mm of wall: 390 + 10 = 400 mm long and 190 + 10 = 200 mm high. The calculator divides 1 by (0.4 × 0.2), which is 1 ÷ 0.08, giving 12.5 blocks per square metre. The face dimensions are the same in every series, so the thickness does not change the count per square metre. A 90 mm block and a 290 mm block both give 12.5 blocks per square metre.

Wall size reference table

These figures use a 10 mm joint. The 1.0 m x 1.0 m row has no waste added (12.5 rounded up to 13). The 6.0 m x 1.8 m and 10.0 m x 2.4 m rows include 5% waste.

Wall DimensionsTotal AreaBlocks NeededMortar (20 kg bags)
1.0 m x 1.0 m1.0 m²132
6.0 m x 1.8 m10.8 m²14216
10.0 m x 2.4 m24.0 m²31535

Block totals are rounded up to the next whole block. The mortar bag counts use the Cement Australia Mortar Mix data sheet, which says one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint. A calculator site gives about 17 blocks per bag, but the calculator uses the maker's figure. For the 1.0 m² row, 13 × 1.10 ÷ 10 gives 1.43 bags, which rounds up to 2. For the 10.0 m x 2.4 m row, 24 m² × 12.5 × 1.05 gives 315 blocks, and 315 × 1.10 ÷ 10 gives 34.65 bags, which rounds up to 35.

Worked example

Take a 6.0 m by 1.8 m wall and follow the calculator's steps.

  1. Wall area: 6 m × 1.8 m − 0 openings = 10.8 m².
  2. Blocks: 10.8 m² × 12.5 blocks per square metre × 1.05 = 141.75. The 1.05 already includes the 5% waste allowance for a plain wall, so do not add waste again.
  3. Rounding 141.75 up gives 142 blocks.
  4. Mortar: 142 blocks × 1.10 ÷ 10 blocks per bag = 15.62 bags. The 1.10 is the 10% mortar waste allowance for spills and mortar dropped.
  5. Rounding up gives 16 bags of 20 kg mortar mix.

Factors affecting your count

The base rate is 12.5 blocks per square metre. The number you buy depends on waste. Built Simple and CalcMyProject give 5% for a plain rectangular wall. They give 10% for a wall with corners, openings and cut blocks. The calculator works wall area as length × height − openings, and walls with openings and many cut blocks need about 10% extra.

If you mix your own mortar on site, the Calculate.co.nz block calculator, which is not a manufacturer, gives about 0.012 to 0.015 m³ per square metre of block wall, and the calculator uses the low end of 0.012 m³. Check with your supplier.

Thickness changes the core-fill volume. Built Simple, a core-fill calculator and not a manufacturer, gives these figures per square metre:

  • 90 mm series: 0.010 m³
  • 140 mm series: 0.023 m³
  • 190 mm series: 0.040 m³
  • 290 mm series: 0.073 m³ (the same page also quotes 0.064, so check with your supplier)

Check your product label or supplier for core-fill needs.

Common mistakes

  • Leaving out the joint. If you measure only the 390 mm by 190 mm face and ignore the 10 mm joint, you will overestimate the number of blocks. Use the 400 x 200 mm module.
  • Ignoring waste. Add 5% for a plain rectangular wall, or about 10% where there are corners, openings and cut blocks.
  • Adding waste twice. The 141.75 in the worked example already includes the 5% allowance.
  • Not rounding up. Round the final block count and the mortar bags up to the next whole number. For example, 15.62 bags becomes 16.
  • Mixing up face and thickness. The thickness changes the core-fill volume but has no impact on the number of blocks per square metre.
  • Mixing units. The calculator uses metres, so 400 mm is 0.4 m and 200 mm is 0.2 m.

Frequently asked questions

Does block thickness change the number of blocks per square metre?

No. The face is 390 mm by 190 mm in every series, so the count stays at 12.5 blocks per square metre.

Why do I need to add 10% for waste?

Built Simple and CalcMyProject give 10% for a wall with corners, openings and cut blocks. For a plain rectangular wall they give 5%.

How many blocks does a 20 kg bag of mortar lay?

Cement Australia says one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint.

Should I include openings in my area calculation?

The calculator works wall area as length × height − openings. Walls with openings and many cut blocks need about 10% extra.

Where can I find specific core-fill volumes?

Core-fill depends on the block series. Check your product label or supplier. Built Simple gives volumes from 0.01 m³ to 0.073 m³ per square metre, depending on the series.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
block length390 mmEditable defaultCornell Engineers (engineering consultancy): standard besser block 390 x 190 mm face, series 90, 140, 190 and 290 mm thick (AS 4455.1 modular size, 10 mm joints).
block height190 mmEditable defaultCornell Engineers (engineering consultancy): standard besser block 390 x 190 mm face.
block joint10 mmEditable defaultStandard 10 mm mortar joint used for the 400 x 200 mm block module (Cornell Engineers; Built Simple calculator).
block mortar m3 per m20.012 m3/m2Editable defaultCalculate.co.nz block calculator (not a manufacturer): about 0.012 to 0.015 m3 of site-mixed mortar per square metre of block wall; the low end is used.
block per 20kg mortar bag10 blocks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint (a calculator site says about 17: the maker figure is used).
block corefill m3 per m2 900.01 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 90 mm series 0.010 m3 of core-fill per square metre.
block corefill m3 per m2 1400.023 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 140 mm series 0.023 m3 of core-fill per square metre.
block corefill m3 per m2 1900.04 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 190 mm series 0.040 m3 of core-fill per square metre.
block corefill m3 per m2 2900.073 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 290 mm series 0.073 m3 per square metre (the same page also quotes 0.064: check with your supplier).
block waste plain5 %Editable defaultBuilt Simple and CalcMyProject: 5% for a plain rectangular wall, up to 10% with corners and openings.
block waste complex10 %Editable defaultBuilt Simple and CalcMyProject: 10% for a wall with corners, openings and cut blocks.
mortar waste10 %Editable defaultEditable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb.